Collection: Dontek Solar Controllers & Sensors
Dontek designs and makes pool solar controllers in Australia. The range runs from a simple, reliable controller for a standard solar install through to wireless and fully automated units, and we supply the full range across New Zealand along with genuine Dontek replacement roof and pool sensors.
Which controller?
- AquaSun 2 – entry level. Straightforward automatic solar control with temperature adjustment, manual mode and a winter mode, and it remembers its settings after a power cut. 2-year warranty.
- AquaSmart 5 – premium. Adds cooling and standby modes, boil and pipe protection, a large backlit screen and a 3-year warranty. Versions: 5 (standard), 5FS (flow switch for boosted/retrofit systems), 5CD (current detection for boosted/retrofit systems), 5CDP (5CD plus solar-powered wireless roof sensor), 5RB (battery wireless roof sensor), 5RP (solar-powered wireless roof sensor), 5AV (drives a motorised valve), 5RT (built-in filter pump timer) and 5RTRP (5RT plus solar-powered wireless roof sensor).
Prices depend on your system, so every item here is email for pricing. Contact justin@poolsolarheating.co.nz and we'll recommend the right controller and parts.
Replacement sensor guide
Dontek makes two sensor families: Digital (for older V-series and AquaSun AS2/AS3 controllers) and "Plus" (for the AquaSmart 5 and AquaSun AS2+/AS3+). They are not interchangeable.
| Controller | Roof (hot) sensor | Pool (cold) sensor | Notes |
|---|---|---|---|
| AquaSun 2 (AS2) – entry level | 1131013 (20 m), 1131024 (50 m), 1131042 (1 m kit) – Digital | 1131018 (2.5 m) – Digital | Red plug to ROOF, blue plug to POOL. AquaSun 2+ (AS2+) units take the Plus sensors instead – check your label. |
| AquaSun 3 (AS3) / AS3+ | AS3: Digital 1131013 / 1131024 / 1131042 AS3+: Plus 1131015 / 1131025 |
AS3: 1131018 Digital AS3+: 1131020 Plus |
Check the label for a "+". |
| AquaSmart 5, 5FS, 5CD, 5AV, 5RT (wired roof sensor) | 1131015 (20 m), 1131025 (50 m) – Plus. 1 m kit 1131044 Plus: check with us | 1131020 (2.5 m) – Plus | Pool sensor calibration is for Plus sensors only. |
| AquaSmart 5RB (wireless, battery) | Battery transmitter 1131051 – check with us (matched set) | 1131020 (2.5 m) – Plus | Roof sensor for the transmitter: check with us. |
| AquaSmart 5RP, 5CDP, 5RTRP (wireless, solar PV) | PV transmitter 1131050 – check with us (matched set) | 1131020 (2.5 m) – Plus | Roof sensor for the transmitter: check with us. |
Source: Dontek's roof and pool sensor pages (dontek.com.au/temperature-sensor-roof-hot and /temperature-sensor-pool-cold), the AquaSmart 5 and AquaSun 2 instruction manuals, and Dontek's 2026/27 product catalogue. If you're not sure which controller or sensor you have, send us a photo of the label and we'll confirm before you order.
AquaSmart brochure (PDF) · AquaSun 2 brochure (PDF) · Sensor troubleshooting guide (PDF)